Rulebook Update

o4/02/2026

Following a Statement from the ORCi please read below regarding SEAT INSERTS.

Following the ORC Promoters meeting recently, the ORC are to go through a process of researching and reviewing the subject of Race Seats including foam type inserts, seat angle, and positioning, and will be providing guidance to Racing divisions in due course, but would advise drivers to consider this when making purchases for the coming season, as rules may be updated. This effects our Rule: RULE 1.9 Seat Part 10

If a Seat insert or additional padding is used the headrest must be padded accordingly to prevent backwards movement. Rule 1.4 TRACK/SUSPENSION/CAMBER - part5

5. The front stub axles must have equal spacing at the bottom on both sides. Only 1 washer with a maximum thickness 3mm is permitted on the bottom. This can have a spot weld to locate it in position but must not be welded in a way it can not be measured. Both bottom washers must be the same thickness. The top is free.